S&S CYCLE 1 7/8 in. Super E Carb Kit – 11-0419

Description

S&S Cycle 1 7/8 in. Super E Carb Kit – 11-0419

Designed exclusively for Harley-Davidson Big Twin and Sportster engines

Butterfly-type carbs with a fully adjustable idle mixture screw and a changeable mid-range and high speed jet

Fully adjustable accelerator pump and a variable enrichment/fast idle device for improved throttle response, engine starting and warm-ups

Super E has a 1 7/8″ (47.6mm) throat at the butterfly and a 1 9/16″ (39.6mm) venturi and is recommended for use on any displacement Big Twin or Sportster

Super G has a 2 1/16″ (52.3mm) throat at the butterfly and a 1 3/4″ (44.5mm) venturi and is recommended for use on 74 cubic inch engines and larger where high performance modifications have been done or are planned (not recommended for smaller, lower compression engines)

If you are not sure which carburetor to use, we suggest the 1 7/8″ Super E

Each complete carb kit includes: one S&S Super E or Super G gas carburetor, one S&S teardrop air cleaner assembly, one manifold, mounting hardware, fuel line, clamps, overflow line, one extra intermediate jet, two main jets, VOES tubing (when applicable), and installation and jetting instructions

 

NOTE: S&S Super E and G carburetors require the use of a two-cable, pull open-pull closed throttle assembly. If your bike is not equipped with one, a two-cable system must be purchased separately

 

Included Items:

(1) Carburetor assembly

 

(1) Air cleaner cover

 

(1) Air cleaner

 

(1) Air cleaner back plate

 

(1) Black rubber breather hose

 

(2) Hose nipples

 

(1) Chrome steel mounting bracket

 

(2) Black clamps

 

(1) Hose clamp

 

(2) 5/16″-24 x 3/8″ Internal torx bolts

 

(2) Breather bolts

 

(3) 1/4″-20 x 7/8″ Phillips counter sunk head bolts

 

(2) 10-24 Pan head bolts

 

(3) 1/4″/20 x 1/2″ Socket cap bolts

 

(2) Set screws

 

(2) Clear plastic washers

 

(1) Domed washer

 

(1) Brass washer

 

(1) Flat washer

 

(10) Shims (assorted sizes)

 

(1) Manifold

 

(1) Manifold insulator block

 

(1) Backplate gasket

 

(2) Clamps

 

(2) Black rubber seal rings

 

(2) Black rubber hoses (assorted sizes)

 

(1) Clear hose

 

(1) Black plastic hose

 

(2) Throttle cable guide

 

(1) Bolt

 

(1) Pack intermediate and main jets (assorted sizes)

Instructions

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.

 

Specifications

Mfg #: 11-0419

Part #: H16103

Type Carburetor – Butterfly

Units Kit

Weight 7.30 lbs

Alternate/OEM Part Number(s):

DS0419